Is Shitao ceramics one of the top ten brands in China what s the price of 80 80 floor tiles

No, the so-called ceramic brand recognized by Foshan ceramic industry authority. Shitao is old and has been working for years, but it is not a first-class brand in Foshan. To buy ceramics or to see whether the brand has a famous brand or famous trademark certificate issued by the State Department, which ensures the strength of the enterprise, then look at the design and color, and finally compare the price. It should be noted that the certificate must be issued by the formal functional departments of the state. Now many brands in the market spend money to buy some association certificates, which are very fake.



Ranking are some big brands with good reputation. In fact, this list is meaningless at all. It is suggested to go to Jianchang to have a look. The brand of ceramic tile should also be selected as big as possible, with guaranteed quality. You have to test the quality yourself. Make sure you know what you know.

Test method:

1. It can be knocked, and the sound is clear and crisp, indicating that the ceramic tile has high porcelain density and hardness, and good quality
(tap the floor tile gently with your hand, if the brick makes a "poop, puff" sound, it indicates that its sintering degree is not enough and its texture is inferior. If there is a slight "Dong Dong" sound, its texture is relatively hard compared with the previous one)

(in fact, the method is very simple. If you knock the high-density ceramic tile with your hands, it will have a crisp fragrance of glass. Low density tiles make a dull noise.)
The lower the water absorption rate is, the higher the internal stability of the ceramic tile is, and the more suitable for the space with high moisture or moisture content (such as toilet and kitchen), and there will be no black spots and other problems

3. Pour a cup of water on the back of the ceramic tile, the water stain will spread rapidly, indicating that the water absorption rate is high,If there is a trace left, the quality is poor

5. To see whether the color of the ceramic tile is clear or not, you can see whether there are pinholes by naked eyes, and the pinholes are easy to accumulate dirt

6 The flatness of the ceramic tile, the side is straight, the paving is easy, and the effect is good (visual inspection method, place the floor tile on the flat surface, see whether the four sides of the tile are completely consistent with the flat surface, and check whether the four corners of the ceramic tile are right angles, and then place the tiles in the same type and model of tiles to observe the degree of color difference)

7 When choosing floor tiles, we often see the material supplier stepping hard on the ground, which can only show that the bottom of his floor tiles is flat, but can not say that his tiles are of good quality

8. If the tiles are painted on the ground, the poor tiles are completely like a piece of chalk due to the density.

9. The first point is "look". Take a look at the grades. The first-class products are the best, while the third-class and substandard products are worrying; the second is the appearance and glaze
surface. Good ceramic tile without convex concave, bulging, warping angle and other issues, straight side flat. The glaze is smooth and smooth, without particles or different colors. The design should be delicate, without obvious color leakage, dislocation, broken line or different depth.
The second key point is listening. With one hand's thumb, index finger and middle finger sandwiched with a corner of the ceramic tile, it is easy to drop, and the other hand's index finger gently hits the middle and lower part of the tile. If the sound is clear and pleasant, it is the top grade, if the sound is dull and muddy, it is inferior.

11. Cut out the broken tiles (generally you can ask the shop keeper for the broken fragments to observe), and look at the fracture. The fracture is fineDense, hard and crisp,
the same color is the top grade.

12. If the water drops on the back of the ceramic tile, the ceramic tile with slow infiltration after water dispersing is regarded as the top grade.

13. In addition to the color you like, you should also choose carefully: first, take out any four tiles from the packing box and place them on the flat ground to compare whether the four tiles are flat and consistent, and whether the diagonal parts of the tiles are embedded. Again is to use the palm to hit the surface of ceramic tile, listen to the sound: the sound of good tile is relatively low: and the sound of bad tile is bright, and has obvious echo. Of course, judging good from sound is relative. But the first comparison method can not be ignored, the biggest difference between domestic and imported bricks is mainly in the consistency of specifications of ceramic tile products.
The surface of glazed tiles should be smooth and delicate; high gloss glazed tiles should be crystal clear and glossy, while Matt and semi Matt glazes should be soft and uniform. Try to scrape the surface of ceramic tile with hard objects. If there are scratches, it means that the glaze is not enough. After the surface glaze is polished
, the tile surface is easy to hide dirt and is difficult to clean. Second, to see whether the product size is standard, you can use a caliper to measure the diagonal line, irregular
tiles will not be straight when paving, causing unsightly. Third, the deformation can be observed directly by naked eyes to see that the product edge is straight and the surface is flat,
in this way, the deformation of the product is small, the construction is convenient, and the tile surface is smooth and beautiful after paving. Four look at the pattern, the pattern should be delicate and realistic, without obvious defects such as lack of color, broken line, dislocation, etc.

15. First of all, see if there is a factory name, address and trademark, so as not to buy "three no" products. Second, look at the quality of productsAnd water absorption. Generally speaking, the lower the water absorption, the higher the strength and frost resistance. If users buy ceramic tiles mainly for paving or outdoor walls, they need to buy products with low water absorption, such as ceramic tiles or stoneware tiles. If users purchase bricks mainly for indoor walls, such as kitchen and toilet walls, products with high water absorption can be selected, such as ceramic tiles. However, it should be pointed out that the requirements for crack resistance, thermal shock resistance, pollution resistance and chemical corrosion resistance are relatively high. Third, look at the friction performance of the product.
If users buy ceramic tiles for paving, they need to check the friction coefficient and wear grade of the products.

16.
First of all, see whether the color is beautiful and pleasing to the eye, in line with their own aesthetic taste. Secondly, about 1 meter away from the sample, under certain light conditions, observe whether the sample has surface defects such as lack of glaze, crack, smoking, falling dirty, glaze bubble, spot, bump and so on; about 3 meters away from the sample, observe whether there is color difference on the surface of the product, so as to master the gloss of the product roughly. Third, knock the sample gently with hand or hammer. If there is a metallic echo, it indicates that the structure of the product is solid; if there is a dull sound, it indicates that the product may have structural delamination defects.

17. Look at the shape of the product. First of all, see whether the actual size of the product is consistent with the marked working size. Secondly, it depends on the change of the product shape, whether the surface of the product is flat, whether the edge is flat, etc.
Six methods to detect the quality of ceramic tiles

1. Drop several drops of tea juice or water on the back of ceramic tiles, and wait for a few minutes, depending on the water dropsIf the degree of diffusion by inhalation is not water absorption or low water absorption rate, the quality is good.
The more crisp the sound, the higher the porcelain degree, density and hardness.
Whether there are scratches when scraping the tiles with sharp objects. If there are scratches, it means that the glaze is poor and easy to slide. After the surface glaze is polished, the surface of the tiles will be dirty and can not be cleaned.
If the color and chroma of ceramic tile are clear and natural, it means that the porcelain degree is high, the color is not clear and the porcelain degree is low.

5. When purchasing, observe with naked eyes whether there are pinholes on the surface within one meter. If so, it means that the glaze is not completely fused, and it is easy to accumulate dirt.

6. Warpage observation: observe whether the tile side is straight by naked eyes. If the warpage is serious, it will affect the firmness of the ceramic tile in the future.

19. Check whether the white surface of the ceramic tile is appropriate, whether the color difference is obvious, whether there are cracks, especially pay attention to check whether there are dark lines, and whether the front and edge of the ceramic tile are covered with glaze layer. Then observe from the side of the ceramic tile to see whether there are spots or defects on the surface glaze layer. If there are no above characteristics, the quality of ceramic tile is satisfactory. Second, listen. If the two tiles are gently bumped, if it makes a "Dangdang" crisp sound, it means that the blank is pressed tightly, with high density and good quality; if the sound is "fluttering" dull sound, it means that the texture of the blank is not dense, or there are dark lines, and its quality is poor. Third, press. The ceramic tile faces the glass flat, according to its four corners, in order to determine its flatness, because the more flat the ceramic tile, the better its quality, and vice versa. Finally, if consumers need to buy in large quantitiesWhen ceramic tile, it might as well discard one or two ceramic tile, the ink drops on the back of ceramic tile to be observed, if the drop of ink is absorbed immediately, it shows that its compactness is poor.

20. : (1) dimension error and whether the geometric size is standard is the key to judge whether the tile is good or bad. Use a tape measure to measure the diagonal and quadrilateral dimensions of the brick surface and whether the thickness is uniform or not.
(2) color difference. Open the box randomly to check several pieces and compare them one by one. Generally, it is normal to have slight differences. If it is very obvious, there will be problems, but the tiles with different production batch numbers will have problems There are also color differences, it is best to buy enough quantity at one time, otherwise the color matching is difficult to be consistent in the future;
(3) cracks, cracks in the underglaze, surface cracks;
(4) uneven, although the glaze layer is bright, there are inclusions in the glaze layer or glaze layer;
(5) spots, isolated color spots in the glaze color;
(6) trauma, crushing or deep cracks, and uneven edges and corners.

21. Look at the appearance
first, according to personal hobbies and functional requirements of the living room and the required field layout, the specification, color and texture of floor tiles are selected.
Good quality floor tiles have uniform specifications, uniform thickness, smooth surface, no bubbles, no stains, no pockmarks, color
bright, uniform and glossy, no defects in corners, 90 degree right angle, no deformation, clear pattern and pattern, good compression resistance, not easy to damage.

it depends on the quality.
First, take out one piece from the packing box at will to see whether the surface is flat and intact. The glaze should be uniform, bright, without spots, lack of glaze and bumping, and the edges are regular. glazeThe surface is not bright, astringent, or there are bubbles are quality problems.

it depends on the degree of rules. Take out a piece of brick and align the two pieces. The smaller the gap is, the better. If it is a pattern brick, you must use four pieces to make a complete pattern. You should also pay attention to whether the pattern of the brick is connected and clear. Erect these bricks one by one to see whether the sizes of the bricks are consistent. The deviation of small bricks is allowed to be ± 1 mm, and that of large bricks is ± 2 mm.

see the color difference. Take out all the bricks in a box and lay them on a large plane. If you look at the whole effect from a slightly distant place, whether it is white, its
other colors or patterns, the color should be consistent. If there are some deep and shallow points of individual bricks, it will be very difficult to see and affect the whole decoration effect.

Second,

to see the internal quality

appearance is the first step, and the second step is to test the internal quality of ceramic tiles. Because light looks good-looking, but also depends on hardness, wear resistance, water absorption. These directly determine the service life of ceramic tile, are some very key factors. Hardness: take one brick to knock another, or use other hard objects to knock the brick. If the sound of the brick is clear and loud, it indicates that the quality of the brick is good and the brick is well burnt. If the sound is abnormal, it indicates that there is double skin or crack in the brick. When the brick is formed, the air in the material is not discharged, resulting in poor combination and internal crack between the materials, which can not be seen from the surface. Only listen to the sound It can be identified. Wear resistance: the wear resistance can not be determined by the sensory sense alone, more likely to rely on some technical indicators. In many standards, matching (also known as wear resistance) is an important judgment standard, which shows the surfaceGenerally speaking, the degree of easy wear of bricks can be divided into five degrees:

degree I: the lowest wear resistance rate, which is generally used for display, walls and places with few activities.

degree II: ceramic tiles with wear resistance greater than grade I are mainly used in bathrooms, bedrooms and other environments without hard friction.

degree III: moderate wear resistance, mainly used in places with large amount of activity. Such as living room, kitchen, etc.

grade IV: high wear resistance. It is very suitable for the lobby, corridor and public places of luxury residence.

V degree:
there is no clear concept for the division of V degree. But in theory, it has super wear resistance and is generally used in non family environment, such as airport, station, etc. Water absorption: water absorption is also a very important index in the use of ceramic tiles. The method of judging the water absorption rate of ceramic tile is very simple, just need to drop a drop of water to the opposite side of ceramic tile, and see the speed of its absorption. Generally speaking, the faster the water absorption and penetration speed of ceramic tile, the higher its water absorption rate, and vice versa, the lower. Generally speaking, the ceramic tile with low water absorption is more dense and of better quality.



No, it's not. China Ceramics in 2010: 1. Dongpeng (China's well-known trademarks, top 500 value brands, provincial famous trademarks, first-line brands, Guangdong Dongpeng Ceramics Co., Ltd.)
2. Xinzhongyuan (China's famous trademark, top ten annual ceramic brands, Guangdong famous trademark, first-line brand, Guangdong xinzhongyuan Ceramics Co., Ltd.)
3. Huiya, Guangdong Province famous brand product, first-line brand, Guangdong Huiya potteryGuanzhu (famous trademark of China, famous trademark of Guangdong Province, top 500 most valuable brands, first-line brand, xinmingzhu Ceramic Group Co., Ltd)
5. Yingpai (China famous trademark, top 500 most valuable brand, Guangdong famous brand, first-line brand, Eagle Holding Co., Ltd)
6. Mona Lisa (China famous brand, China famous brand, Guangdong Province famous brand, first-line brand, first-line brand, China famous brand, Guangdong Province famous brand, first-line brand), Guangdong Mona Lisa Ceramics Co., Ltd)
7. Marco Polo (China famous trademark, Chinese famous brand, Guangdong famous trademark, first-line brand, Guangdong Weimei Ceramics Co., Ltd)
8. Golden rudder (China famous trademark, Guangdong famous brand, Guangdong famous trademark, first-line brand, Foshan Jinduo ceramics Co., Ltd)
9. SMIC (China famous brand, Shanghai famous brand, first-line brand, first-line brand, Shanghai famous brand, first-line brand, Guangdong famous brand, Guangdong famous brand, Guangdong Weimei Ceramic Co., Ltd.)
7, Shanghai smiker Building Ceramics Co., Ltd)
10. Nobel (China famous brand, national inspection free product, Zhejiang famous brand, Hangzhou Nobel Ceramics Co., Ltd)



No, in terms of good quality, more than ten brands of Shuncheng enterprises are very good, Baite, Wang Zhe, Jinrui, Chuang Rui, etc